30L Stainless Steel Sander

  • China 30L Stainless Steel Sander, 30L Stainless Steel Sander Wholesalers, 30L Stainless Steel Sander Brands
  • China 30L Stainless Steel Sander, 30L Stainless Steel Sander Wholesalers, 30L Stainless Steel Sander Brands
  • China 30L Stainless Steel Sander, 30L Stainless Steel Sander Wholesalers, 30L Stainless Steel Sander Brands
30L Stainless Steel Sander
  • Lechi
  • Dongguan,China

The newly designed centrifugal separator has large flow and smooth discharge. The arrangement of rotor and cylinder with golden section ratio as standard. Abrasive media over 0.1mm can be used. All imported machinery
Standard parts such as seals, bearings, conveyor pumps, belts and pulleys. Double cooling mode inside and outside can effectively reduce the heat generated during grinding.

The laboratory horizontal grinder adopts the closed design of eccentric disc grinding chamber. The grinding disc is installed on the stirring shaft in a certain order, which overcomes the uneven distribution of grinding medium and the particle size distribution after grinding in the traditional horizontal grinder.

Poor drawbacks. Material enters the grinding chamber under the action of the feed pump. The design of the entrance is at the end of the driving connecting flange. The material flow direction is opposite to the bottom of the mechanical bearing, which greatly reduces the mechanical seal.

Under pressure and prolong its service life, the mixture of material and grinding medium moves relatively efficiently during the high-speed operation of eccentric disc of stirring shaft. As a result, solid particles of material are effectively dispersed and sheared.

After grinding, the final product is obtained by separating the filter with dynamic large flow rotor slot. Depending on the product grinding process, the independent batch cycle grinding and tandem grinding process can be adopted.


FAQ
Horizontal sander "strike"
To solve this problem, first of all, we need to check whether the power supply of the grinder is working normally, whether the fuse is fused, and whether the tension spring is broken. As long as the "disease" repair work will be very simple, it is nothing more than to switch on the power supply, replace the new fuse, replace the tension spring. If the machine suddenly does not work, then we should...more
Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy

close left right